Turning Off Your Water Pipe

Further Details

 

 

 

Just about everyone seems to have their personal opinion in relation to How to Turn of.


How to Find and Shut Off Main Water Shutoff Valve
One of the most common places a water main will certainly be situated in residence is in your boiler room, basement, or an eliminated panel in an area for your residence.
Once you locate the water main you will simply turn the valve clockwise to shut all the water off in your home up until you have completed the repair service. Some residences will certainly enjoy shutoff with a bar that you can draw as opposed to turn to shut the water off.
If you try to shut the water off to your fixtures by using an angle stop and that doesn't work you will need to close of the water pipe to make your repair service. There are additionally several various other factors you could need to shut the water main like repairing frozen pipes, fixing leakages, changing components or taps.
Many individuals are not mindful that they also have a water pipe shutoff right in their very own home and also simply call a plumber of never ever end up doing the repair service up until things get truly bad because they simply do not know that shutting the water main is really easy.

 

How to Find and Shut Off Main Water Shutoff Valve

 

Where is the main water shutoff valve located?

 

This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.

 

How to Turn Off Main Water Valve

 

Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.

 

If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.

 

Where are the isolation valves?

 

Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.

 

Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.


Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.


Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Turn off the Water for Plumbing Repairs

 

I stumbled upon that page about How to Locate & Turn Off Main Water Shut-Off Valves while doing a lookup on the internet. Enjoyed reading our write-up? Please share it. Help someone else find it. Thank you for going through it.



Source This Article

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Turning Off Your Water Pipe”

Leave a Reply

Gravatar